Mobirise

Universal interface CC2 (2 IN / 2 OUT)

EK-CC2-TP 

KNX bus device functioning as 2-channel input for the connection of potential-free contacts and 2-channel output for control of low-consumption LED. Mounting in wall box or on 35 mm rail (EN 60715) with the support EK-SMG-35 (to be ordered separately). Power supply via bus. Bus terminal block included in the delivery. To be used in KNX installations for home and building automation. 

Mobirise

Universal interface CD2 (4 IN / 4 OUT)

EK-CD2-TP

KNX bus device functioning as 4-channel input for the connection of potential-free contacts and 4-channel output for control of low-consumption LED. Mounting in wall box or on 35 mm rail (EN 60715) with the support EK-SMG-35 (to be ordered separately). Power supply via bus. Bus terminal block included in the delivery. To be used in KNX installations for home and building automation. 


Mobirise

Universal interface CE2 (4 IN conf. / 2 OUT)

EK-CE2-TP

KNX bus device functioning as 4-channel input for the connection of potential-free contacts (1 configurable for NTC temperature probe) and 2-channel output with 5A relais switching and control of loads. Mounting in wall box or on 35 mm rail (EN 60715) with the support EK-SMG-35 (to be ordered separately). Power supply via bus. Bus terminal block included in the delivery. To be used in KNX installations for home and building automation. 

Mobirise

Interface CF2 for load monitoring and control

EK-CF2-TP

nterface for load monitoring and control that can be used for:

- the instantaneous current measurement absorbed by (up to) three single-phase electrical circuits or one three-phase electrical circuit;
- the control of electrical loads with priority detachment (and re-attachment).







Mobirise

Universal interface CG2 (4 IN conf. as DI or NTC / 4 OUT) with thermostat function

EK-CG2-TP  

KNX bus device functioning as 4-channel input configurable for the connection of potential-free contacts or passive temperature sensors (NTC 10 kΩ at 25°C, to be ordered separately) and 4-channel output for control of low-consumption LED. Room thermostat function for 4 independent zones. Mounting in wall box or on 35 mm rail (EN 60715) with the support EK-SMG-35 (to be ordered separately). Power supply via bus. Bus terminal block included in the delivery. To be used in KNX installations for home and building automation. 

Mobirise


NEW Configurable logical module LM2 

EK-LM2-TP

This module performs logic and data processing functions on data exchanged on the KNX bus.

The device is powered by the KNX bus line with a SELV voltage 30 Vdc and does not require auxiliary power. Mounting in wall box or on 35 mm rail (EN 60715) with the support EK-SMG-35 included in the delivery. To be used in KNX installations for home and building automation. 

Mobirise

Current trasformer for EK-CF2-TP interface

EK-TA

Current transformer (CT) to be used in combination with the load monitoring and control interface EK-CF2-TP. Available versions:
EK-TA-05A (0...5 A)
EK-TA-20A (0...20 A)
EK-TA-30A (0...30 A)
EK-TA-40A (0...40 A)
EK-TA-50A (0...50 A)
EK-TA-60A (0...60 A)

© Copyright 2020 SmartEngineering OÜ - All Rights Reserved

Mobirise web maker - Find out